Intrinsic Defect Limit to the Growth of Orthorhombic HfO2 and (Hf,Zr)O2 with Strong Ferroelectricity: First-Principles Insights

It is believed that promoting the fraction of ferroelectric orthorhombic phase (o-phase) through O-poor growth conditions can increase the spontaneous polarization of HfO₂ and (Hf,Zr)O₂ thin films. However, the first-principles calculations show that the growth may be limited by the easy formation of point defects in the orthorhombic and tetragonal phases of HfO₂, ZrO₂, and (Hf,Zr)O₂. Their dominant defects, O interstitial (O_i) under O-rich conditions and O vacancy (V_O) under O-poor condition, have low formation energies and quite high density (10¹⁶–10¹⁹ cm⁻³ for 800–1400 K growth temperature). Especially, O_i has negative formation energy in tetragonal HfO₂ under O-rich condition, causing non-stoichiometry and limiting the crystalline-seed formation during o-phase growth. High-density defects can cause disordering of dipole moments and increase leakage current, both diminishing the polarization. These results explain the experimental puzzle that the measured polarization is much lower than the ideal value even in O-poor thin films and highlight that controlling defects is as important as promoting the o-phase fraction for enhancing ferroelectricity. The O-intermediate condition (average of O-rich and O-poor conditions) and low growth temperature are proposed for fabricating HfO₂ and (Hf,Zr)O₂ with fewer defects, lower leakage current, and stronger ferroelectricity, which challenges the belief that O-poor condition is optimal.     

Borage Oil Enhances Lamellar Body Content and Alters Fatty Acid Composition of Epidermal Ceramides in Essential Fatty Acid-Deficient Guinea Pigs

Borage oil [BO: 40.9% linoleic acid (LNA) and 24.0% γ-linolenic acid (GLA)] reverses disrupted epidermal lipid barrier in essential fatty acid deficiency (EFAD). We determined the effects of BO on lamellar body (LB) content and LNA and GLA incorporation into epidermal ceramide 1 (CER1) and epidermal ceramide 2 (CER2), major barrier lipids. EFAD was induced in guinea pigs by a diet of 6% hydrogenated coconut oil (HCO) for 10 weeks (group HCO) or 8 weeks followed by 6% BO for 2 weeks (group HCO + BO). LB content and LNA and GLA incorporation into CER1 were higher in group HCO + BO than in group HCO. Small but significant levels of LNA, GLA, and their C20-metabolized fatty acids [dihomo-γ-linolenic acid (DGLA) and arachidonic acid (ARA)] were incorporated into CER2, where ARA was detected at a level lower than LNA, but DGLA incorporation exceeded that for GLA in group HCO + BO. Dietary BO enhanced LB content and differential incorporation of GLA into CER1 and DGLA into CER2.     

The Multifaceted Mas-Related G Protein-Coupled Receptor Member X2 in Allergic Diseases and Beyond

Recent research on mast cell biology has turned its focus on MRGPRX2, a new member of the Mas-related G protein-coupled subfamily of receptors (Mrgprs), originally described in nociceptive neurons of the dorsal root ganglia. MRGPRX2, a member of this group, is present not only in neurons but also in mast cells (MCs), specifically, and potentially in other cells of the immune system, such as basophils and eosinophils. As emerging new functions for this receptor are studied, a variety of both natural and pharmacologic ligands are being uncovered, linked to the ability to induce receptor-mediated MC activation and degranulation. The diversity of these ligands, characterized in their human, mice, or rat homologues, seems to match that of the receptor’s interactions. Natural ligands include host defense peptides, basic molecules, and key neuropeptides such as substance P and vasointestinal peptide (known for their role in the transmission of pain and itch) as well as eosinophil granule-derived proteins. Exogenous ligands include MC secretagogues such as compound 48/80 and mastoparan, a component of bee wasp venom, and several peptidergic drugs, among which are members of the quinolone family, neuromuscular blocking agents, morphine, and vancomycin. These discoveries shed light on its capacity as a multifaceted participant in naturally occurring responses within immunity and neural stimulus perception, as in responses at the center of immune pathology. In host defense, the mice Mrgprb2 has been proven to aid mast cells in the detection of peptidic molecules from bacteria and in the release of peptides with antimicrobial activities and other immune mediators. There are several potential actions described for it in tissue homeostasis and repair. In the realm of pathologic response, there is evidence to suggest that this receptor is also involved in chronic inflammation. Furthermore, MRGPRX2 has been linked to the pathophysiology of non-IgE-mediated immediate hypersensitivity drug reactions. Different studies have shown its possible role in other allergic diseases as well, such as asthma, atopic dermatitis, contact dermatitis, and chronic spontaneous urticaria. In this review, we sought to cover its function in physiologic processes and responses, as well as in allergic and nonallergic immune disease.     

A Comprehensive Review of Genetically Engineered Mouse Models for Prader-Willi Syndrome Research

Prader-Willi syndrome (PWS) is a neurogenetic multifactorial disorder caused by the deletion or inactivation of paternally imprinted genes on human chromosome 15q11-q13. The affected homologous locus is on mouse chromosome 7C. The positional conservation and organization of genes including the imprinting pattern between mice and men implies similar physiological functions of this locus. Therefore, considerable efforts to recreate the pathogenesis of PWS have been accomplished in mouse models. We provide a summary of different mouse models that were generated for the analysis of PWS and discuss their impact on our current understanding of corresponding genes, their putative functions and the pathogenesis of PWS. Murine models of PWS unveiled the contribution of each affected gene to this multi-facetted disease, and also enabled the establishment of the minimal critical genomic region (PWScr) responsible for core symptoms, highlighting the importance of non-protein coding genes in the PWS locus. Although the underlying disease-causing mechanisms of PWS remain widely unresolved and existing mouse models do not fully capture the entire spectrum of the human PWS disorder, continuous improvements of genetically engineered mouse models have proven to be very powerful and valuable tools in PWS research.     

Characterization of Dog Glutathione Transferase P1-1, an Enzyme Relevant to Veterinary Medicine

Glutathione transferases (GSTs) form a family of detoxication enzymes instrumental in the inactivation and elimination of electrophilic mutagenic and carcinogenic compounds. The Pi class GST P1-1 is present in most tissues and is commonly overexpressed in neoplastic cells. GST P1-1 in the dog, Canis lupus familiaris, has merits as a marker for tumors and as a target for enzyme-activated prodrugs. We produced the canine enzyme CluGST P1-1 by heterologous bacterial expression and verified its cross-reactivity with antihuman-GST P1-1 antibodies. The catalytic activity with alternative substrates of biological significance was determined, and the most active substrate found was benzyl isothiocyanate. Among established GST inhibitors, Cibacron Blue showed positive cooperativity with an IC₅₀ value of 43 nM. Dog GST P1-1 catalyzes activation of the prodrug Telcyta, but the activity is significantly lower than that of the human homolog.     

Preparation of transparent BaSO4 nanodispersions by high-gravity reactive precipitation combined with surface modification for transparent X-ray shielding nanocomposite films

BaSO₄ nanoparticles as important functional materials have attracted considerable research interests, due to their X-rays barrier and absorption properties. However, most of BaSO₄ nanoparticles prepared by traditional technology are nanopowders with broad size distribution and poor dispersibility, which may greatly limit their applications. To the best of our knowledge, the synthesis of transparent BaSO₄ nanodispersions was rarely reported. Here, we firstly present a novel and efficient method to prepare transparent and stable BaSO₄ nanodispersions with a relatively small particle size around 10 to 17 nm using a precipitation method in a rotating packed bed (RPB), followed by a modification treatment using stearic acid. Compared with the BaSO₄ prepared in a traditional stirred tank, the product prepared using an RPB has much smaller particle size and narrower size distribution. More importantly, by using RPB, the reaction time can be significantly decreased from 20 min to 18 s. Furthermore, the transparent BaSO₄-polyvinyl butyral nanocomposite films with good X-ray shielding performance can be easily fabricated. We believe that the stable BaSO₄ nanodispersions may have a wide range of applications for transparent composite materials and coatings with X-ray shielding performance for future research.     

Analysis of the corrosion failure causes of shale gas surface pipelines

A shale gas gathering and transportation pipeline in a good block in Sichuan Province started leaking after less than a year of operation. To investigate the causes of corrosion of the sulfate-reducing bacteria (SRB), optical microscopy, scanning electron microscopy, and X-ray diffraction were used to analyze the corrosion and perforation of the shale gas surface pipeline in conjunction with bacterial corrosion simulation experiments. The results showed that the pipeline material (L360N) conformed to the requirements of the American Petroleum Institute 5 L standard and that extracellular polymeric substances were present in the corrosion pits. The corrosion products mainly included FeCO₃, FeS, CaCO₃, MgCO₃, and Fe mineralization. At 40°C, the uniform corrosion rate of L360N in the simulation experiment was 0.234 mm/a, and the local corrosion rate was 0.458 mm/a. SRB, saprophytes, and iron bacteria were detected in the on-site water medium and corrosion products, indicating that the main causes of shale gas pipeline corrosion are bacterial and CO₂ corrosion.     

4D Printing of Shape Memory Materials for Textiles: Mechanism,Mathematical Modeling,and Challenges

Shape memory materials (SMMs) in 3D printing (3DP) technology garnered much attention due to their ability to respond to external stimuli, which direct this technology toward an emerging area of research, “4D printing (4DP) technology.” In contrast to classical 3D printed objects, the fourth dimension, time, allows printed objects to undergo significant changes in shape, size, or color when subjected to external stimuli. Highly precise and calibrated 4D materials, which can perform together to achieve robust 4D objects, are in great demand in various fields such as military applications, space suits, robotic systems, apparel, healthcare, sports, etc. This review, for the first time, to the best of the authors’ knowledge, focuses on recent advances in SMMs (e.g., polymers, metals, etc.) based wearable smart textiles and fashion goods. This review integrates the basic overview of 3DP technology, fabrication methods, the transition of 3DP to 4DP, the chemistry behind the fundamental working principles of 4D printed objects, materials selection for smart textiles and fashion goods. The central part summarizes the effect of major external stimuli on 4D textile materials followed by the major applications. Lastly, prospects and challenges are discussed, so that future researchers can continue the progress of this technology.